RSB Empire → Speaking & Consulting → EPC Owners Engineer

EPC Owners Engineer
Industrial Equipment Procurement, Owner-Side

Call (561) 779-3213 or use the short form below. Randolph Scott Bell reviews specifications, levels bids and vets suppliers on your side of the contract, so industrial equipment procurement on your project is judged by an engineer who has bought and sold this kind of equipment internationally. Advisory only.

Call (561) 779-3213 Send the Short Form
B.S. Engineering, Aalborg University MBA University of Miami CGC1528750 Florida Certified General Contractor LEED AP Credentialed

What an owners engineer does on an EPC project

An EPC contract hands engineering, procurement and construction to one contractor. That is efficient, and it also means the party buying your equipment is the party being paid to keep cost down. An owners engineer sits on your side of that arrangement. The role is to read the technical specification before it is issued, check that each bidder has priced the same scope, follow the major equipment packages as they are ordered and built, and raise the gaps between what the contract says and what the design needs.

Randolph offers this as advisory work only: consulting, owner’s representative, feasibility and EPC advisory. He does not build the plant or sell the equipment, which is what keeps the advice independent.

Industrial equipment procurement, step by step
Experience on both sides of the order

Randolph’s early career was in Denmark, in energy: waste-to-energy and biomass boiler plants, heat-pump and ventilation product development, and insulation equipment. He sourced and sold mechanical ventilation products from across Europe, South Africa and the Middle East, so international procurement is something he has done, not only reviewed, and he delivered manufacturing equipment projects across Europe.

Today he combines that with a Florida Certified General Contractor license (CGC1528750), an MBA from the University of Miami, a B.S. in Engineering from Aalborg University, LEED Accredited Professional status, and RESNET Certified HERS Rater (RTIN 4516301) credentials. Where the equipment is for a building or an energy plant, one adviser can read both the machine and the construction around it.

Where it applies

The equipment categories this advice most often touches are heat recovery and boiler plant, ventilation, heat pumps and cooling. See how related advisory work is scoped:

Biomass power plant consulting · Waste-to-energy consulting · CHP and cogeneration feasibility · Heat pump product development · Geothermal heat sink consulting · Owner’s representative and permit expediting.

This site has received CSS Design Awards Special Kudos 2026 and Web Design Awards Winner 2026.

Tell Us What You Are Buying

Name, phone and a line about the equipment. That is all we need.

Prefer to talk now? Call (561) 779-3213

Frequently Asked Questions
What does an EPC owners engineer do?

An EPC owners engineer works for the owner, not the contractor. On an engineer-procure-construct contract that means reviewing the technical specification before it goes out, checking that bids price the same scope, watching the equipment packages as they are bought and built, and flagging where the contract and the design disagree. Randolph Scott Bell offers this as advisory work only.

What is industrial equipment procurement?

It is the buying side of a plant or building project: deciding what major equipment is needed, writing the specification, qualifying suppliers, comparing bids on a like-for-like basis, and following the order through manufacture and delivery. The advice here covers the owner's side of that process.

What falls under industrial equipment?

Typically the large packaged items a facility depends on: boilers and heat recovery equipment, fans and ventilation plant, heat pumps and cooling equipment, process lines and electrical gear. Which items matter on your project is the first thing to settle on a call.

Do you build the plant or supply the equipment?

No. The offer is consulting, owner's representative, feasibility and EPC advisory work. Nothing here claims a power plant or data center was built by this firm.

What experience sits behind this advice?

A Danish energy career in waste-to-energy and biomass boiler plants, heat-pump and ventilation product development and insulation equipment, international sourcing of ventilation products, and delivery of manufacturing equipment projects across Europe. Today Randolph holds a B.S. in Engineering from Aalborg University, an MBA from the University of Miami, a Florida Certified General Contractor license (CGC1528750), and is a LEED Accredited Professional and RESNET Certified HERS Rater (RTIN 4516301).

How does an owners engineer differ from an owner's representative?

The two overlap. An owners engineer leans technical: specifications, equipment selection, performance and design review. An owner's representative leans on schedule, scope, cost and permitting. Both stand on the owner's side of the contract, and one adviser can cover both on a project.

Can you help me compare equipment bids?

Yes. Bid leveling is a core part of the work: lining up what each supplier included, what each left out, and which assumptions differ, so the comparison is on the same scope rather than on the lowest headline number.

Who is this for in Palm Beach County?

Owners, developers, facility operators and boards who are buying major mechanical or energy equipment and want an independent technical read before they sign. A project outside the county is a conversation to have by phone.

Do you work on biomass, waste-to-energy or heat recovery projects?

Those are the areas of long experience. See the pages on biomass power plants, waste-to-energy consulting and CHP and cogeneration feasibility for how that advisory work is scoped.

How do I start?

Call (561) 779-3213 or send the short form on this page with your name, phone number and a line about the equipment you are buying.

📞  Call (561) 779-3213 — Talk It Through